Montini Princess Sofia Tombstone Wall Set (bulding bricks Compatible)
Montini Princess Sofia Tombstone Wall Set (bulding bricks Compatible)
3D
Published 2020-02-03T19:52:37+00:00 • Remix de Tombstone of a Princess Sofia Volkonskaya, Montini building bricks Two Pip Set (Lego Compatible)
This set of Montini bricks forms a wall with the relief of the tombstone of Princess Sofia Volkonskaya.
Just like the vintage original Montini parts, these are compatible with classic Bulding Bricks full height bricks.
Montini building bricks were produced from 1961 to 1969 in the Netherlands. They were originally made from soft, pliable polypropylene. The diagonal fins bend slightly around the pips of the other block.
puppenhausmuseum.de/montini-bausteine.html
Please do not mix these with original Montini parts. PLA is much harder than the original bricks, and the layer ridges act like sand paper. You will wear out the original Montini bricks very quickly.
Original art scan
https://www.myminifactory.com/object/3d-print-tombstone-of-a-princess-sofia-volkonskaya-100168
These are optimized for a 0.4mm nozzle. They are friction fit parts, so tolerances are important.
Before printing, check that the infill angle is across the diagonal fins. That will prevent sagging of the first layer of the top plate that has the pips.
I set the Horizontal Shells Top to 7, and Bottom to 10 to allow for the relief to have infill, but the brick to be solid.
| Date published | 03/02/2020 |
| Sin apoyo | YES |