Near East University Face Shield
Near East University Face Shield
Published 2020-04-01T14:06:03+00:00
Personal protective equipment “face shields” produced by Near East University for front-line healthcare workers operating in close contact with COVID-19 patients
- 1:30min print time
- 1 part
- Basic assembly
- Works with A4 transparent sheets
- Hooks for Rubber Band for better fitting
- Approved by Near East Hospital Medical Staff
- Print with 0.3mm resolution
- Add Touching Build plate support for the pins
- Test for both ABS and PLA
- Tested with Prusa MK3/MK3S and Ultimaker 2+ Extended, 3, S3. S5.
- Should be suitable for 2 hole punches for the holes in the shield
- Check the forehead part and sandpaper if needed
- Please watch the video for assembly https://youtu.be/L9ESlN0agMQ
- Add Touching Build plate support for the pins - Test for both ABS and PLA - Tested with Prusa MK3/MK3S and Ultimaker 2+ Extended, 3, S3. S5. - Should be suitable for 2 hole punches for the holes in the shield
Date published | 01/04/2020 |
¿Cuándo tiempo lleva? | 1 - 2 minutos |
Cantidad de filamento | 22 grams |