Pac-Man & Ghosts planters (multicolor)
Pac-Man & Ghosts planters (multicolor)
3D
Published 2019-01-02T09:55:32+00:00
This is a multicolor Pac-Man themed planter designed to hold small plants, like small cacti.The intended presentation is like in the first photo, with a planter ghost following Pac-Man which has a coin in front of him and follows a scared ghost planter. So, two planters. But the middle part of the base can be repeated to add more ghosts to the chain (or removed if you only want two figures). The figures attach to the base using small magnets that you have to glue. The base has a space for water to drip in.
There are also two variations for the ghost and scared ghost. They don't have the planter hole, and one of them also lacks the base attachment. The ones without the attachment do not need the base and rest directly on their feet (also, no need for magnets). There is a support for the independent Pac-Man.
Printing:
First choose which variations you want.
Note: You can not print the eyes of the ghosts independently to glue them afterwards. They won't fit in the eye sockets. But the pupils can.
Planter
Base
- BaseStart.stl (black)
- BaseMid.stl (black, optional & repeatable)
- BaseEnd.stl (black)
Pac-Man
- PacMan-uppermouth.stl (black)
- PacMan-upperskin.stl (yellow)
- PacMan-eyeleft.stl (black)
- PacMan-eyeright.stl (black)
- PacMan-lowermouth.stl (black)
- PacMan-lowerskin.stl (yellow)
Print the upper parts and eyes in one object and the lower parts in another one. Both parts of the mouth touching the bed. The lower half object should not need supports but needs brim. See photos.
Planter Ghost
- GhostPlanterBody.stl (any color)
- GhostLeftEye.stl (white)
- GhostLeftPupil.stl (black)
- GhostRightEye.stl (white)
- GhostRightPupil.stl (black)
Scared Planter Ghost
- ScaredGhostPlanterBody.stl (any color, I recommend a pastel one)
- GhostLeftEye.stl (white)
- GhostLeftPupil.stl (optional, black, or white)
- GhostRightEye.stl (white)
- GhostRightPupil.stl (optional, black, or white)
I recommend printing the ghosts upside down. Primarily to reduce the waste tower. See photo.
Coin
- Coin.stl (yellow)
No need for supports, but add a brim. See photo.
No planter
Same base, Pac-Man and coin as before.
Regular Ghost on base
- GhostBody.stl (any color)
- GhostLeftEye.stl (white)
- GhostLeftPupil.stl (black)
- GhostRightEye.stl (white)
- GhostRightPupil.stl (black)
Regular Scared Ghost on base
- ScaredGhostBody.stl (any color, I recommend a pastel one)
- GhostLeftEye.stl (white)
- GhostLeftPupil.stl (optional, black, or white)
- GhostRightEye.stl (white)
- GhostRightPupil.stl (optional, black, or white)
I recommend printing the ghosts upside down. Primarily to reduce the waste tower. See photo.
Independent
Same Pac-Man and coin as before.
Support
- SupportNoMagnet.stl (black, print the copies you need)
Support base used for Pac-Man and the coin.
Independent Ghost
- GhostIndependentBody.stl (any color)
- GhostLeftEye.stl (white)
- GhostLeftPupil.stl (black)
- GhostRightEye.stl (white)
- GhostRightPupil.stl (black)
Independent Scared Ghost
- ScaredGhostIndependentBody.stl (any color, I recommend a pastel one)
- GhostLeftEye.stl (white)
- GhostLeftPupil.stl (optional, black, or white)
- GhostRightEye.stl (white)
- GhostRightPupil.stl (optional, black, or white)
I recommend printing the ghosts upside down. Primarily to reduce the waste tower. See photo.
Post-Printing:
Pac-Man: glue the two parts together.
Ghosts: remove supports.
If you printed the versions with a base, glue small neodymium magnets (6mm diameter, 2mm height) in the little holes on the base and the objects (make sure you align the polarity correctly before gluing them).
If you printed the versions without a base, glue the support base to Pac-Man and the coin.
| Date published | 02/01/2019 |