AEMISC03 - Paint Water Stabilizer
985
visitas
129
descargas
8
colecciones
0 comentarios
Cargando comentarios... 
AEMISC03 - Paint Water Stabilizer
3D
Published 2021-03-26T12:20:03+00:00
22
0
Add to Collection
Descripción
A simple stabilizer for paint water cups. We hate spilling our paint water, so this is our solution. The stabilizer comes in two sizes, Large with a 70mm diameter and Small with 35mm diameter.
Small sized diameter is perfect for most paints and pill bottles.
Licencia
Detalles de impresión
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Información técnica
| Date published | 26/03/2021 |
Más información
Archivos