PCB vise 180º flip
PCB vise 180º flip
3D
Published 2017-12-08T17:07:40+00:00
I needed a vise, so I design one, hope that be useful to you as well.
You will need:
M6 threaded rod (you choose length)
10mm aluminium pipe (+/- the same length)
M6 rounded union (10mm diameter )
1 M4 bolt and nut
some base ...
3 screws for fixing the base and small one for the knob.
Only for reference my base has : 250x120x20mm
Tip: with some eat in the treads it's easier to put them in.
you must use some super glue in the M6 union and in the knobas some lubrificant in the esphere of the knob.
Printer:
Micro Delta Rework
Rafts:No
Supports:No
Resolution: 0.2 @ 0.5 nozzle
Infill: 30%
Notes:
PLA black & blue @ 205/60 ºC
Walls: 1,5mm (0.5 nozzle) or 3 walls.
Top and bottom 1mm.
No supports because one of the jaws I made the support.
| Date published | 08/12/2017 |
| ¿Cuándo tiempo lleva? | 480 - 480 minutos |
| Cantidad de filamento | 6000mm |
| Dimensiones | 250x120x60 |
| Sin apoyo | YES |