AEPHAR08 - The Old Kingdom
$8.00 AEPHAR08 - The Old Kingdom
3D
Published 2020-11-30T14:34:16+00:00
This set is included in our 3 month loyalty pack for Tribers pledging $15 or more.
Inside this set you will find 18 .STL models for 3d printing. The development of this goes back to Will Walker's first custom project "Egyptian 1" that was published several decades ago in May 2017. He poured countless hours into chopping together a pictorial alphabet to simulate hieroglyphs. It's hard to call the original set a huge success, as the models were badly errored and definitely showing their age. Multiple attempts to repair those files have been made over the years, but the original files could not be salvaged. Thankfully our fantastically talented sculptor Nasos Maloudis was able to craft up brand new wall elements. Will went back to the original alphabet and cut a new version from scratch for buffed Pharaoh/Seraphim floors. We are thrilled with the results, and we hope you will enjoy them.
TERRAIN Recommended Print Settings:
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% recommended for all models
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 30/11/2020 |
| Precio | $8.00 |
| Sin apoyo | YES |