MK2 Buttton with Nub
MK2 Buttton with Nub
Published 2017-10-09T11:50:32+00:00
This is a slight revision of Prusa Research stock LCD button to ease fast scrolling during axis moves. Other designs seem to obscure the reset button which is critical when PINDA calibration crashes.
Sliced on Cura with many custom settings. Unfortunately at the time of this part, Cura 2.7 will not allow selection of custom material profiles so modifications of default ABS material was employed. If you have better slicer or setting preferences, by all means use your own. I will provide the settings as printed for Cura 2.7.
Below assumes your Live Z is tuned in for ABS.
QUALITY
Layer Height 0.1 mm
SHELL
Wall Thickness 0.8 mm
Top/Bottom Thickness 0.8 mm
INFILL
Infil Density 100% (slow but blobbing is avoided)
MATERIAL
Printing Temperature 240°C
Build Plate Temperature 110°C
Flow 100%
Enable Retraction Checked
Retraction Distance 0.8 mm
SPEED (mm/s)
Print Speed 30
Travel Speed 90
Initial Layer Speed 30
Initial Layers Print Speed 30
Initial Layer Travel Speed 90
Maximum Z Speed 0
Number of Slower Layers 3
COOLING
Enable Print Cooling Checked
Fan Speed 40%
Regular Fan Speed 20%
Maximum Fan Speed 40%
Initial Fan Speed 0%
Regular Fan Speed at Layer 7
Lift Head Checked
SUPPORT: None
ADHESION
Build Plate Adhesion Type "Brim"
Brim Width 8.0 mm
Date published | 09/10/2017 |
¿Cuándo tiempo lleva? | - 36 minutos |
Cantidad de filamento | 2 g |
Dimensiones | 21.0 x 25.5 x 11.5 mm |
Tecnología | FDM |
Complejidad | Fácil |
Sin apoyo | YES |