Spetsnaz Helmet for 1/6 figure
Spetsnaz Helmet for 1/6 figure
3D
Published 2018-05-29T11:14:02+00:00
For full screen, go to YouTube.
Since it is designed not to require a supports.
It is not necessary to post-process after output.
The default size is suitable for 12-inch(1/6) figure model face.
In this case, The face of figures are not uniform in size.
So, the part that fixes the chin strap is adjustable.
If you want to print in the size of the picture, enlarge it to 110%.
In this case, the output of the chin strap is not necessary.
It is recommended to use PLA.
I used a 0.3~0.4mm nozzle.
Layer height is recommended 0.1mm.
If the nozzle you use is larger than 0.3~0.4mm,
If you enlarge the model, it will print well.
Because the model is detailed, it will look great even with larger outputs.
For correct assembly, please watch my youtube video.
Channel : https://www.youtube.com/c/CUBEBlueSky
| Date published | 29/05/2018 |
| Sin apoyo | YES |
thank you