Ram Block Percussion
Ram Block Percussion
3D
Published 2019-04-18T07:45:45+00:00
These percussion blocks were inspired by my desire to create an array of 3d printable percussion instruments that are inexpensive and musical.
The blocks can be mounted on a drum kit, percussion rig, or you can print the handle, nut, and bolt to use them as hand played instruments. Best of all, you can print as many as you like and use them in a parade.
The Percussion blocks also come in three different sizes and are made to accommodate a 10.5mm Rod and U Clamp. The dimensions of the attachment area are: 25mm X 22mm with an 11mm hole and is the same on all blocks. I have also included a printable handle, nut, and bolt where you can attach any of the blocks together to use as a hand instrument.
You can print these blocks with at least a 30% infill and produces a great sound. You should print the bolt at 50% infill. The Wail Block can be printed vertically for best results
The purchase includes 6 files: Small Block, Medium Block, Large Block, Handle, Nut, and Bolt
You can print these blocks at a 35% infill and will produce a great sound. You should print the bolt at 50% infill.
The purchase includes 6 files: Small Block, Medium Block, Large Block, Handle, Nut, and Bolt
The Ram Block interior supports can be every other row. It will print well and also be easier to remove afterward.
| Date published | 18/04/2019 |
I mixed and matched a hi-hat mount for your block. Thanks a lot for sharing this, they sound great!