I designed this flatbed as a way for hobbyists, like me, to be able to make their rig more scale, and have those details that makes it yours, and makes it unique. It has features, like tie down points, and a built in trailer hitch receiver to add even more scale and usefulness. The flat bed is also sized to fit one my other designs, the RC Fisher Spreader, so that it fits perfectly and makes it look even more realistic. the mounting plate for the flatbed, is meant to attach to the rear frame support of the Axial SCX10 II Kit, and to attach the mounting plate to the frame support, you will need two M3 x 6mm screws. You will also need to drill holes in the mounting post, and you’ll need to provide your own body clips. The holes in the bottom of the flatbed are for the shocks to mount to. This is because you get rid of the whole rear mounting post system. With doing that, you will have to have four M3 x 6mm screws to hold the rear frame support in place. If you have any question about this design, or any of my other designs, please email me at firstname.lastname@example.org.