RC transmitter stick toggle switch cap Multiplex mc 4000
RC transmitter stick toggle switch cap Multiplex mc 4000
Published 2018-07-11T15:12:12+00:00
I added a switch inside my MPX 4000 aluminum stick transmitter, thanks to the cap shape i designed, no glue needed, just press fit, and obviously you need to file to adapt the sub mini toggle switch and to solder wires that goes inside the hollow stick. This mod cost less than 3$ (using a surplus sub mini switch, 20 cm of wires and a 3 pin connector to suit spare )
Printed at 0.10 layer thickness in PETG with brim, should work fine also in PLA. Solid cap is few hundreds of mm bigger to have good press fit. The cap with hole for switch has strong interference fit on toggle switch neck, than it expand a litte and develop good interferene fit also with external (alluminum tube stick)
Date published | 11/07/2018 |
¿Cuándo tiempo lleva? | 4 - 16 minutos |
Dimensiones | 7x7x8mm |
Sin apoyo | YES |