RC Truggy - Fully 3D printed RC car
RC Truggy - Fully 3D printed RC car
3D
Published 2020-09-19T16:22:15+00:00
Hi guys! This is my new project, a fully 3D printed RC Truggy. To access the video just click on the following link: https://youtu.be/we-pLEeqJOg
This is a very versatile car, all terrain and very fun to drive. It has some problems that are explained in the video but I'm already working on a new version where I try to solve the problems of this car.
Along with the STL files is also a PDF which is the instruction manual where is the list of all necessary parts.
All parts were printed with a 0.4mm nozzle, except the gears inside the differential ( Diff gear A and Diff gear B). I used PLA to print the rigid parts and TPU to print the flexible parts like the tires and springs from the suspension.
All the parts were printed in an original Ender 3, the only modification I made was to put a 0.2mm nozzle to print some smaller parts.
To print this car I used PLA and TPU but these materials can be replaced. It is an easy car to print, it was all printed at an original Ender 3 and for this reason it is accessible to the great majority of printers.
I used two nozzles, one 0.4mm and one 0.2mm.
The infill and nozzle size to be used on each part is explained in the instruction manual.
| Date published | 19/09/2020 |