Remove before flight tag (Concorde Edition)
5,590
visitas
529
descargas
5
colecciones
0 comentarios
Cargando comentarios...
Remove before flight tag (Concorde Edition)
3D
Published 2018-05-16T12:34:41+00:00
109
0
Add to Collection
Descripción
I always wanted one of these tags, so I decided to make one myself. I chose to use the Concorde, as it is one of the most iconic and more recognizable airplanes in the world, despite not flying any more...
You can print it in two colors even if you only have one nozzle and it looks really cool.
Enjoy it!
Detalles de impresión
Print in two colors by stopping the print and swapping filaments at 1.5 mm (or use your secondary nozzle from this height).
Be sure to increase a bit the flow for the first layer after the change of filaments to improve adhesion between materials.
My settings (you can vary them):
- Nozzle diameter: 0.4mm
- Speed: 35-40 mm/s
- Layer height: 0.15mm
- Infill: 100%
Información técnica
Date published | 16/05/2018 |
¿Cuándo tiempo lleva? | 120 - 150 minutos |
Cantidad de filamento | 19 grams |
Dimensiones | 152.1mm x 67.0mm x 2.5mm |
Tecnología | FDM |
Complejidad | Fácil |
Sin apoyo | YES |
Más información
Archivos