Ring Bell For Treat
Ring Bell For Treat
3D
Published 2017-10-26T10:59:16+00:00
This doorbell plate was made in Tinkercad, with only shape generators and basic shapes, and was designed with the BCN3D printer in mind! The ability of the BCN3D to print water-soluable support material means you can print this design in one go, and paint it, or, if you like, print the different parts in multiple colors of filament, assemble, and glue it all together! You can add a little scare to the pressing of the doorbell for your trick-or-treaters, but don't be surprised if they just prefer to knock! https://www.tinkercad.com/things/087zrtXX30C
Want to incorporate an electronic component? Buy the SadoTech Model C Wireless Doorbell (Link: http://a.co/ddQz1sZ) and affix the doorbell plate to it for a complete Halloween solution. Use the "Thick_Frame_For_SadoTech_Doorbell.stl" to create a frame that will be 18mm when scaled to 0.7. You can also just scale in the Z direction for other doorbells of different heights.
The red painted version shown in the pictures uses the "Thick Frame".
I had to scale everything to 0.7 for it to fit on my print bed. If you print each of the pieces separately, I recommend keeping them in the current orientation as uploaded so that the support material will not interfere with the assembly. (A good glue for adhering 3D-printed PLA parts is from GlueSmith.) A heated bed is recommended (I don't have one) because of the length and width of the doorbell plate (parts like this usually curl up on the ends on me.) Using Shurtape for my print, I had no problems though!
Support Type: Everywhere
Structure Type: Lines
Overhang angle for support: 60
Fill amount:15%
Distance X/Y (mm): 0.7
Distance Z (mm): 0.1
| Date published | 26/10/2017 |
| ¿Cuándo tiempo lleva? | 8 - 12 minutos |
| Cantidad de filamento | 61 grams (20.45 meters) at a scaling of 0.7 |
| Dimensiones | When scaled to 0.7, it is 109.2 mm x 135.8mm x 46.402mm |
| Tecnología | FDM |
| Complejidad | Fácil |
Thanks for this project! I really like it!