Sabrent SSD case
3,255
visitas
246
descargas
1
colección
0 comentarios
Cargando comentarios...
Sabrent SSD case
3D
Published 2018-09-06T15:04:14+00:00
13
0
Add to Collection
Descripción
This is a case for the Sabrent SSD to USB adapter. There are 3 versions and all of them should fit. I tested it with the type-c version. Every normal SSD should work. (max. height 7.7mm / 0.3031496 inch)
If the lid doesn’t fit, you just need to cut off a little bit the corners of the Case.
If the SSD is too lose take a piece of paper and fold it once or twice and put it in the case.
Detalles de impresión
layer height: 0.2mm
infill: 20%
Información técnica
Date published | 06/09/2018 |
Cantidad de filamento | 53g |
Dimensiones | 74mm x 14mm x 122mm |
Sin apoyo | YES |
Más información
Archivos