Samsung micro USB guard
11,218
visitas
2,191
descargas
12
colecciones
1 comentarios
Cargando comentarios... 
Samsung micro USB guard
3D
Published 2018-03-08T11:42:47+00:00
532
1
Add to Collection
Descripción
My cable was falling apart so I decided to make a ''CableGuard'' for my phone charger.
This a samsung (micro USB) version off the ''iCableGuards'' from Sergio Romero. If you have an Iphone, then check out his design:
(https://www.myminifactory.com/object/3d-print-21235)
Detalles de impresión
Print with the cylinder down, otherwise there is a chance that your cable will not fit. You might have to lower the print speed or use supports if the results are bad. If the tube is too small and the end of the tube is cutting into your cable, use V2. Otherwise it will not protect your cable but it will damage it instead. (In generalI recommend using the stl file V2).
Información técnica
| Date published | 08/03/2018 |
| ¿Cuándo tiempo lleva? | 15 - 20 minutos |
| Cantidad de filamento | 1g, ~0,5m |
| Dimensiones | 15,8mm x 8,3mm x 33mm |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
Más información
Archivos