Savage Orc Warrior


$6.99 Savage Orc Warrior
Published 2019-06-12T17:27:53+00:00
A Fearsome Orc Warrior made for 3D printing.
Supports Required!
The model in the photo was printed on a Kelant Orbeat D100 (DUP/DLP/Resin Printer) at a total height of 15cm. An upscaled version has also been printed in PLA on a Creality Ender 3 with great success.
I split the model into 3 parts (Upper/Lower/Base), but I've also included the whole model in two versions (High poly and Low Poly) if you want to print it as is or if you want to split the model yourself.
Let me know if you run into any problems and I'll do what I can to help.
Feel free to follow my instagram aijouArt if you like what I do. I'd love to see your prints, so you're welcome to tag me if you post pics.
Date published | 12/06/2019 |
Precio | $6.99 |
Dimensiones | 0mm x 0mm x 0mm |
I've printed this model both with a resin printer and in PLA on an Ender 3. I used pretty much standard High quality settings. Nothing out of the ordinairy. The tricky part is the support and model placement imo. I printed the base flat without supports, the lower body upside down with supports and the upper body right side up at a slight backwards angle with supports. Hope this helps. Here's my Ender 3 Print: