Scrolling Marque Clock - Top-of-Monitor Case
Scrolling Marque Clock - Top-of-Monitor Case
3D
Published 2018-07-23T16:49:25+00:00 • Remix de ESP8266 Scrolling Marque Clock
An alternate box to hold the electronics from Qrome's excellent ESP8266 scrolling marque clock project. Please see his project to see features, required components, etc. https://www.myminifactory.com/object/3d-print-esp8266-scrolling-marque-clock-65739
I liked the idea, but wanted both a slightly longer display (this case is for a display made from 5 matrix units rather than just 4), and wanted it to sit on the top edge of one of my monitors in a similar way to how my Logitech center-speaker sits on top of a different display.
Besides the basic clock components, this case will require 4 short M3 screws to hold the back on (I used M3x4 socket-caps that I had laying around - the holes are deep enough to take an M3x6), and a longer M3 screw and nut to hold the back foot on and serve as the hinge. You'll want at least an M3x14 back there, extra length will just stick out.
The front face is 0.4mm thick - optimized for printing at 0.2mm layer heights so you get one layer in each direction through the face. All walls are 2mm thick, so a 0.5mm extrusion width (no problem with a standard 0.4mm nozzle) with two perimeters will come out mostly solid. There are so few places thick enough to have infill that it doesn't really matter, use whatever you like.
| Date published | 23/07/2018 |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
