SkeeRide -- RC Snowmobile
$20.00 SkeeRide -- RC Snowmobile
Published 2020-12-13T02:43:18+00:00
Remote control Snowmobile. Designed with simplicity in mind. Very simple to print and build.
See it in action here: https://www.youtube.com/playlist?list=PLlR55U8ujh5gw4XuwwtaiLJ96BsT7JZC5
Very few parts needed to puchase, most parts are printed. Everything goes together using M3 screws. Takes a standard 540 size motor and standard 55g servo.
Most parts print without any supports. The few parts that take supports wont need a lot of them. Almost all is printed in PLA, with the handle bars and snow flap printed in TPU. Designed to fit a 200x200mm print bed.
This thing is a lot of fun.
Parts needed to complete:
⦁ 540 size Motor
⦁ Speed Controler
⦁ Transmitter & Receiver
⦁ Battery
⦁ 6700zz Bearings 10x15x4mm (need 9)
⦁ 55g metal gear servo(need 1)
⦁ M3 screw assortment
⦁ 80mm shocks (need 3)
⦁ 55mm shock (need 1)
⦁ Traxxas Spur Gear 56T 3957(need 1)
⦁ Traxxas Pinion Gear 9T-21T(depending on motor speed)
⦁ Optional LED lights (5mm front, 3mm back)
Discord Channel: https://discord.gg/mF5BzVw23a
You may NOT sale any product from these files, including printed parts. Product licence info found here: https://www.myminifactory.com/object-licensing. Anyone found in violation of this will be prosecuted. If you wish to sell printed sleds please contact me through personal message and we can work out a deal.
Disclaimer: Due to printer abilities being different and always changing, and the nature of an off road vehicle there is a good chance you will brake parts. Luckily they should be easy to reprint and fix rather quickly. I will do my best to provide support through discord and if files are found in need up improvement I will do my best to improve and then include for free for those who have purchased the snowmobile. I give no guarantee that it will print perfect on your machine or that things will not brake when you send the sled flying off a cliff.
0.2mm layer height
4-6 perimeters
15% infill for non structural parts(hood, seat, etc)
75% infill for structural parts(frame, a-arms, spindal, gears, etc)
If your driving seems to break a specific part often then try printing it in TPU but with many perimiters and high infill, this should help absorb the impacts.
| Date published | 13/12/2020 |
| Precio | $20.00 |
| Dimensiones | 0mm x 0mm x 0mm |
I bought the files & almost done printing it, awesome job on designing it, thank you for all your hard work & making it available to buy. Is there a way my friend can buy a fully printed sled from you since he doesn't have a printer?