KS3AET08 - Aethertowne Cargo & Goods
$2.00 KS3AET08 - Aethertowne Cargo & Goods
3D
Published 2021-04-19T08:07:32+00:00
This set, Aethertowne Cargo & Goods, was crafted soley by Colin Christenson after the original campaign closed for this project. After all was said and done, he decided to make a fantastic set of scatter terrain to help fill out the industrious nature of Aethertowne. The war below the clouds rages and this arsenal of independence never rests in the pursuit of freedom and trade!
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 19/04/2021 |
| Precio | $2.00 |
| Sin apoyo | YES |