KS3AET03 - Aethertowne Mad Science Scatter
$3.00 KS3AET03 - Aethertowne Mad Science Scatter
3D
Published 2021-01-30T09:14:54+00:00
Included in this set of scatter terrain are supportless printing models for filling out a mad scientists lair.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 30/01/2021 |
| Precio | $3.00 |
| Sin apoyo | YES |