Snap-On Classic and Heritage Series Handle Mounted Coat Rack
Snap-On Classic and Heritage Series Handle Mounted Coat Rack
Published 2021-04-13T08:14:39+00:00
This coat rack is designed to mount onto the handle of a Snap-On Classic or Heritage series toolbox. I have put the original design sketch with the toolbox dimensions in the images if you want to confirm that it will fit your box before printing. These dimensions are:
- 84.5mm (3.33in) from outside of the toolbox handle to the outside face of the box
- Handle diameter is 28.8mm (1.13 / 1 1/8 in)
This coat rack was spit into 2 pieces to fit onto a 200x200mm bed.
The hardware required to assemble the coat rack are:
-2x 1/4-20 x 2in button, socket, or other round head screws
-2x 1/4-20 x 1.5" button, socket, or other round head screws
-4x 1/4-20 hex nuts, standard or nylock will work.
Only the lower half of this part needs support material.
Date published | 13/04/2021 |