Sony ActionCam tripod mount (as100V) (various versions)
Sony ActionCam tripod mount (as100V) (various versions)
3D
Published 2018-01-22T11:04:36+00:00
The original part cost 48 dollars and it is very hard to find. This is a life saver if you own one of these cameras.
There are two designs: one with the tread into the plastic and one with a hole for a nut.
I have only printed the one with the thread build it and it is holding study.
For he screw to the Camera I used a m4 * 8. And to keep it in place I got a e-clip 3/16 from home depot (see pictures).
Next revision I might build a whole for the e-clip so the camera sits completely flat on the base .
UPDATE:
Created version 2.0 with a hole for the e-clip or washer and also more room for the M4 screw that attaches the camera to the base. Why?I am now going to use M4x8mm Thread Carbon Steel Knurled Round Head screws.
Printed on monoprice maker select plus.
.2 mm resolution.
20% infill.
PLA.
| Date published | 22/01/2018 |
| Tecnología | FDM |
| Complejidad | Fácil |