Sony NEX/a5000/a6000 Hand Shroud
Sony NEX/a5000/a6000 Hand Shroud
3D
Published 2019-12-12T10:40:31+00:00
This is a functional design based on somthing like the Peak design Clutch. It's designed to attach to the 1/4"-20 thread in the base of the camera, and can be adjusted for different hand sizes left to right.
To use this, you'll need a 1/4"-20 x ~3/8" screw, preferably a thumbscrew so it can be easily removed. Additionally, friction or masking tape can be applied to the mounting surface to improve hold. You'll also need a clip, zip tie, or strap to attach it to the top clip.
Compared to the Peak design Clutch at $40, this is about $1 in plastic, with maybe $1 in further parts, so a cost savings of about 95%, for similar functionality.
Printed with a 0.6mm nozzle at ~60mm/s, 0.3mm layer height, 20% double line infill, with 5 shells. Use small supports for the slot. Printed on plain glass, unheated, with Matterhackers Green Build PLA at 212 C.
| Date published | 12/12/2019 |
| ¿Cuándo tiempo lleva? | 60 - minutos |
| Cantidad de filamento | ~32 g |
