Spacelamp
2,837
visitas
126
descargas
2
colecciones
0 comentarios
Cargando comentarios...
Spacelamp
3D
Published 2016-07-04T17:32:57+00:00
5
0
Add to Collection
Descripción
this is my own spacelamp, I printed the bulb by PETG (HDglass) and spiralize function set on my slicer. The base and the extension was printed by PLA separated and then glued toghether. need 2 screw and bolt M4 x15mm for assembly the lamp holder and the extension. After print you need to cut the bottom bulb part :-). TIP: insert the electric wire before gluing the two parts
Información técnica
Date published | 04/07/2016 |
¿Cuándo tiempo lleva? | - 600 minutos |
Cantidad de filamento | 310 gr |
Dimensiones | 180 x 180 x 340 mm |
Tecnología | FDM |
Más información
Archivos