Spinning Christmas Star
Spinning Christmas Star
3D
Published 2017-03-21T13:24:20+00:00
This design features multiple (3 or 4) outline style Christmas stars that spin independently on the centre shaft. The shaft runs from the smallest star through the outer stars to the mount / end cap. The end result is a 'new dimension' in Christmas Star decorations.
This is a straight forward, easy one piece print that doesn't use much filament and produces a smart moving (rotating) decoration. There are two versions and two sizes of each type as follows:
Hanging - This version has a top mounting hole so it can be hung up. Files provided are for 3 stars (116mm x 120mm) or 4 stars (153mm x 158mm).
Tree - Made to be used on the top of a Christmas Tree. It has a thin hole up the centre so it can be mounted on top of artificial Christmas trees with a top stem up to approx. 4mm in diameter. Alternatively, insert a rod or skewer into the hole in the base of the star to extend it's length then secure it to the top stem of your Christmas Tree with wire, cable ties or similar. Files provided are for 3 stars (116mm x 133mm) or 4 stars (153mm x 164mm).
With an accurate slicing app and well set up / precise machine the design should leave all parts free to move straight off the build plate (with Raft removed). Scaling up should be no problem but scaling down more than about 5% may result in the parts fusing so unable to move independently.
Print one for the top of your tree and more to hang from your tree or other places as bright / colorful and unique decorations for use over the Christmas period.
Please refer to the print settings and images for additional information... and post images of your Spinning Christmas Stars on display.
Note: If you like this check out the rest of my fun and practical designs.
Easy print. Do not use automated support or it may fuse the joints. Raft is recommended for ease and safe removal from the build plate. Remove Raft carefully to avoid damage / breaking the Star.
Remove the Raft (if used) then hang or mount on top of your Christmas Tree.
| Date published | 21/03/2017 |
| Tecnología | FDM |