SplashLIGHT
SplashLIGHT
Published 2014-11-02T10:42:34+00:00
Up-cycle Any Bottle Into a Beautiful Feature Lamp!
Bottles are great when they are full, but the're even better when they are empty with the Splash LIGHT. Display that expensive bottle of wine you never wanted to drink or a memorable night on the tequila (we've all had one of them). Compatible with most size bottles and interchangeable if you feel like creating a different lighting mood. Every bottle will change the ambiance according to that particular bottle style. Experiment with your favorite bottles or explore new ones, the variations are endless. For the light, we found an old halogen desk lamp, dismantled it and retrofitted it to the SplashLIGHT - be careful because these emit a lot of heat. We left the socket free inside the splash fountain so it could be moved up and down inside the bottle to the position we wanted. Alternatively, use it as a bottle holder without the light feature. It's up to you. SplashLIGHT it your way! For the light, we found an old halogen desk lamp, dismantled it and retrofitted it to the SplashLIGHT - be careful because these emit a lot of heat. We left the socket free inside the splash fountain so it could be moved up and down inside the bottle to the position we wanted. Please don't do any wiring if you are not comfortable with it.
_________________________________________________________________________
If you purchase this object through the MyMiniFactory Store please note:
-
This product will come unassembled and unpainted when you buy it. We encourage you to be creative, personalize it as you wish. Express your awesomeness and share a picture of the final result with us!
-
Unless you have a particular request, the colour of your print will be chosen at random and will be printed in either ABS or PLA filament.
-
Delivery time will be between 1 and 4 weeks from the moment you order the object. This is dependent on your location and the length of time the object takes to print.
-
Email info@myminifactory.com if you would like any further information or if you have any special requests.
-
Sometimes orders will be printed live on MyMiniFactory TV - check it out here.
_________________________________________________________________________
Print at 0.2mm layer height, with 20% infill. This uses 107g of filament and takes 616minutes.
Date published | 02/11/2014 |
¿Cuándo tiempo lleva? | 600 - 700 minutos |
Cantidad de filamento | 107g |
Dimensiones | 162mm x 127mm x 132mm |
Complejidad | Medio |
Printed on a Deltaprintr Kickstart edition.