Split Bowl
Split Bowl
3D
Published 2020-09-09T15:40:15+00:00
A split cereal bowl from MrRocketman on Thingiverse:
https://www.thingiverse.com/thing:65193
In the slicer I made the bowl a bit taller and wider so it could hold more. I never intended for this model to hold cereal like it suggests, more like candies, pistachios, etc. This bowl is NOT watertight, so be cautious of that when printing.
To make it watertight, increase the perimeters/shells to 5-6, increase the resolutions to 0.3mm and have 2-3 top/bottom layers. And possibly increase the infill to 75-100% (lots of time and material). If there are still holes in the model, I would suggest applying a epoxy/resin to the outside/inside.
This particular print was sliced in Simplify3D.
Printed with 0.2mm resolution and 10% infill.
Filament is Matterhackers 1.75mm Grapefruit Pink.
Time: 10h:22m:04s.
| Date published | 09/09/2020 |
| Sin apoyo | YES |