SSD Mount 2.5" to 3.5" adapter
2,616
visitas
147
descargas
2
colecciones
0 comentarios
Cargando comentarios...
SSD Mount 2.5" to 3.5" adapter
3D
Published 2020-08-11T11:34:11+00:00
10
0
Add to Collection
Descripción
This is a simple and quick to print ssd mount.
I couldn't find one that just changed the fixing holes spacing on the bottom of 2.5" drives to the 3.5" drive spacing, so here is mine.
The holes are all 3mm. this should allow the 2.5" drive screws to easily pass though to the drive, and the larger 3.5" drive screw should self tap into the outer holes.
The mount is a slim 2.5mm thick, but as ssd's are incredibly light this seems to be plenty.
Print settings are not critical, probably 3 shells (1.2) 0.2mm layer height.
Licencia
Información técnica
Date published | 11/08/2020 |
Sin apoyo | YES |
Más información
Archivos