Talisman Global (Rotating) Turn-Counter and Time-keeper
Talisman Global (Rotating) Turn-Counter and Time-keeper
3D
Published 2017-07-31T10:10:45+00:00
This is a 'Global' dice-counter, and Day/Night keeper for the Talisman boardgame with 'Blood Moon' expansion. Holds two D6's.
We place it with the rounded edge to the board, and the square part to the one keeping an eye on the game-flow.
It allows 2 simultaneaous counters, to keep track of turns for an event involving multiple players, f.e.
You place the card in the holder, turn the pointer of the dice holder to the player that triggered the event, and start counting..
It also has a slot in front of the Day/Night switch, it allows you to put a card in it, that should be discarded when dawn/dusk appears, f.e.
For this design I used tree things:
https://www.thingiverse.com/thing:1939478
- Used stone texture
AND
https://www.thingiverse.com/thing:764352
- Used dice holder
- Cleaned & closed bottom
- Added hole in center and pin to match
AND
https://www.thingiverse.com/thing:2341075
- Used card Slot profile
I made a 'Night' and a 'Day' 3D object of the original card-design. These go into a holder.
Designed the hole and pin. Tested rotation. Then I made the base to keep it all together.
-PrintStuff-
You might want to print Day/Night in different colors.
Print the Diceholder twice.
No supports needed.
for Cura, enable 'Expand skins into infill' preference. (to avoid holes where walls meet.)
Tested print on Prusa MKII.
-Assembly-
Diceholders: First put pin through hole in bottom of the dice-holder. Then use a dice inside it, to press it into the hole in the base.
Day-Night: The Day/Night Holder has small print-supports that needs to be removed. Use plyer or cutter. You can glue the '3D cards' in the slots of the holder. Then push down the lot on the pin in the middle of the base. (you might need to do a run-in, by turning it a few times left and right, so it slides more easily.)
I can only say how gratefull I am that people share stuff so others can change it. So if you're keen to that principle, don't go making money on what people share for free !
-Enjoy-
| Date published | 31/07/2017 |
| Tecnología | FDM |
| Complejidad | Fácil |