Tall Headphone Stand - no supports
Tall Headphone Stand - no supports
Published 2019-11-15T03:40:15+00:00
These stands are my first original uploads. I used the makerbot headphone stand for quite some time, and gradually found changes I wanted to make for an improvement. I also designed it specifically for ease of printing. No supports are needed and the chamfered edges should give a good finish on any machine or layer height. This design is the tallest I could print on my Prusa MK3, and can hang most large gaming headphones. I also added a hanger for loose cables.
This print does not require any supports, a brim is suggested
2 perimeters and 10% infill should be strong enough for any headphones. If you like to slam down your headphones then maybe for 3 perimeters and 20% infill would be better
Date published | 15/11/2019 |
¿Cuándo tiempo lleva? | 540 - 541 minutos |
Cantidad de filamento | 200 |
Dimensiones | 250mm x 90mm x 162.5mm |
Sin apoyo | YES |