Tetra Vent Chandelier
$4.50 Tetra Vent Chandelier
3D
Published 2018-04-23T16:38:50+00:00
Hi, if you like this check out my other creations and support me here.
This, the second in the series of T Light Chandeliers that get bigger and more complex, started at three, they can be used singularly, in size groups or mixed and matched as you want.
You can use LED Tealights instead of burning ones for peace of mind - they will fit too.
Inspired by the tube worms that live around Hydrothermal vents at depths of around 2.5 km this series of Chandeliers uses T Lights to their best advantage by grouping them together increasing their light out-put.
They lend an elegant functionality to any dining table or home, while mimmicking the gentle sway of marine environs.
I used a raft for this print as it makes removal from the print plate just so much easier and reduces the chances of damaging the print.
Layer height 0.1mm
Walls 0.4
Infill 25%
Print speed 60mm/s
Adhesion- Raft
No support
Print time just short of a day
| Date published | 23/04/2018 |
| Precio | $4.50 |
| ¿Cuándo tiempo lleva? | 1217 - minutos |
| Cantidad de filamento | 132gm |
| Dimensiones | 123mm x 122mm x 168mm |
| Sin apoyo | YES |
Love the file!