The Kush Kaddy | Case/Wallet for Herbal Cigarettes
The Kush Kaddy | Case/Wallet for Herbal Cigarettes
3D
Published 2021-01-06T17:13:38+00:00
INTRO
While walking around, it can be really annoying to have to stop and roll as you go about your day. Keeping herbal cigarettes loose in your pocket is also a risk, as they will very easily bend or absorb moisture.
To solve this, I have developed the 'Kush Kaddy'. It has taken many design iterations to get to this point but I am very happy with how this has turned out.
It features a fully print-in-place hinge design with no supports needed, a push-to-lock mechanism to hold it shut and 5 spaces for whatever you wish to put in there.
PRINTING
This item must be printed in one piece. It is not possible (or at least not easy) to join these two halves together after being printed seperatiely.
The .3mf file has the two parts positioned apart as they should be; however, if you wish to position them yourself, the X-offset is 78.75mm apart.
This has been designed and tested to be printed without supports or rafts. But you may want to add them depending on how good your printer is.
BTC Donation Address: 391ZHh9iVVXUovTH4CisDwqMumNa2ii9GY
This item must be printed in one piece. It is not possible (or at least not easy) to join these two halves together after being printed seperatiely.
The .3mf file has the two parts positioned apart as they should be; however, if you wish to position them yourself, the X-offset is 78.75mm apart.
This has been designed and tested to be printed without supports or rafts. But you may want to add them depending on how good your printer is.
| Date published | 06/01/2021 |
| Sin apoyo | YES |