The NestPod - 3D Printed Small Bird/Animal Nest Box
$5.00 The NestPod - 3D Printed Small Bird/Animal Nest Box
Published 2019-04-03T10:54:40+00:00
The prototype for the FoodPod, my Wildlife Feeder, hangs outside my patio doors and I often see little birds nipping in and out of it. I wondered therefore if the design could be adapted into a nest box for small birds; they're the ones who so often have their nests broken into and destroyed by larger birds so let's see Mr Woodpecker try to hammer his way through an ABS shell...
The result was The NestPod, an adaptation of the design of the FoodPod, designed to be mounted to a tree or wall and for smaller birds to make their nests in. The three large holes of The FoodPod have been replaced with one 30mm aperture suitable for wrens, robins, bluetits and other smaller species. The front section can be unlocked in the same way so the pod can be cleaned and then locked back in place to make a watertight seam.
The NestPod could also be used, without the mounting collar, for small house-pets like mice, rats, hamsters etc, able to be cleaned in the same way.
The NestPod is available, printed to order in a range of colours & fully assembled, in my Etsy store - www.etsy.com/uk/shop/eterprisexddesign
| Date published | 03/04/2019 |
| Precio | $5.00 |
| Dimensiones | 120mm x 120mm x 61.16mm |
