The ORI-CAR-MI
The ORI-CAR-MI
3D
Published 2019-02-01T15:52:26+00:00
The ORI-CAR-MI or 'Ori-car' for short is a fun little print for anyone to enjoy! Utilizing elements such as living hinges, material thickness, a few extra non-print materials, and some clever designing this print is a fun one!
The Ori-Car derives it's name from Origami...obviously! The flat-fold design of the car is what makes this print unique!
Some extra parts will be needed for the full finish...however this can be made all your own.
(x4) #14 O-rings, (x2) 25mm or (1"appx) Wooden dowels with a thickness of 5mm or (.25"appx).
Super Glue WILL BE NECESSARY.
I hope you all enjoy this little creation of mine! Steps and some final shots are in the pictures provided!
Thank you.
Printed in PLA. 208-215C
Layer heigth - 0.1-0.15 mm
Speed 20 - 30 mm (depending on scale!)
2 Perimeters, SOLID INFILL for the Body. Wheels can be 25% or less.
I used glass for a smooth finish, however any print surface should work.
| Date published | 01/02/2019 |
| ¿Cuándo tiempo lleva? | - 120 minutos |
| Dimensiones | approx 110 x 110 x 10 mm |
| Tecnología | FDM |
| Sin apoyo | YES |