TribesTiendaCrowdfundingFORUMNEWCanvasThe AdventureNEWPhysical

The Shwarmajet: nerf rival PVC adapter trigger [version3] (no support)

3D File Logo  3D

Published 2019-04-12T18:27:07+00:00

    The Shwarmajet: nerf rival PVC adapter trigger [version3] (no support) image
    The Shwarmajet: nerf rival PVC adapter trigger [version3] (no support) image
Loader
3D
360°
2,956 visitas 70 descargas
Imágenes de la comunidad Añadir tu imágen
Loader
  • Picture of print of The Shwarmajet: nerf rival PVC adapter trigger [version3] (no support)
  • Picture of print of The Shwarmajet: nerf rival PVC adapter trigger [version3] (no support)
0 comentarios
    Cargando comentarios...

    The Shwarmajet: nerf rival PVC adapter trigger [version3] (no support)

    3D File Logo  3D

    Published 2019-04-12T18:27:07+00:00

    yonaton d chanowitz

    @yonichanowitz

    3 objetos

    1 Seguidor
    4 0 Add to Collection
    Descripción

    an attachment to make a cheap, nerf rival round accepting blaster, that uses air power to shoot lots of balls with great innacuracy!

    requires 

    1) 3 1" PVC couplers

    2) 1 1" PVC pipe (at least 1' long, but not more than 2' 1/2)

    3) 1 1" PVC pipe (3" length)

    4) a milk/detergent bottle (some type of bottle made out of HDPE. [i like to recycle])

    5) the cap of the above bottle

    6) a small spring (a pen spring or small printer spring will do. i got mine from the trash)

    7) a cordless leaf blower (or any cordless blower/fan)

     

    • sand trigger part to fit into main adapter loosly
    • drill/cut a hole, the size of the rival rounds in the milk bottle cap. make sure to deburr it
    • glue the cap of the bottle to the 3" length of PVC, creating a 'hopper' adapter
    • attach one coupler to top hole of main adapter
    • attach milk bottle 'hopper' adapter to coupler
    • glue/melt a PVC coupler onto the leaf blowers funnel (or make a funnel from another milk bottle)
    • put trigger into main body
    • glue/melt the smallest piece to the main adapter body
    • lock main adapter body onto smaller adapter hole
    • attach last coupler to smaller adapter hole
    • connect spring from loop on smaller adapter hole to trigger
    • glue/melt grip onto main adapter, making sure you can still pull the trigger back enough
    • attach leaf blower to back hole of main adapter
    • have fun spraying balls......expect to miss

    This object was made in Tinkercad. https://www.tinkercad.com/things/1qflwhjrMkU

    Mostrar más Mostrar menos
    Licencia
    Detalles de impresión

    use rafts, but DO NOT use support rods

    infill should be %85+ (ideally %100)

    requires sanding

    Información técnica
    Date published 12/04/2019
    ¿Cuándo tiempo lleva? 8 - minutos
    Más información
    Archivos
    Nerf Rival Pvc Adapter Trigger Version3 No Support.stl
    3D View
    Etiquetas
    adapter diy gun blaster Nerf cheap TinkerCAD Rival
    Objetos interesantes para ti
    Mostrar más