the Tuscan Order column
$4.00 the Tuscan Order column
3D
Published 2021-01-15T14:48:26+00:00
This 3D models are the Tuscan Order Columns.
It consists of a capital, shaft, base.
Except for joining clamp part(Related : Empolia-Pole), the column is designed according to historical research.
and it is designed in three versions, 7, 8, 9 diameter.
7 times diameter version is the most consistent with historical research.
The total height of column is 162mm and is compatible with all of architecture series released by bluesand.
hope you like it :)
[Note]
As of May 10, 2023, two 3d models for resin printers have been added.
- [100mm] Tuscan Column 7D.stl
- [100mm] Tuscan Column 7D without drums.stl
You can freely adjust the scale of the column.
the quality of this product is maintained until it is scaled down to 50%, but less than that cannot be guaranteed.
[Update Notes]
- 03/18/2021
Add "100mm height version of tuscan 7D column STL files and 7mm 1.1t X-clamp STL file"
* For the 100mm height version, please use the 7mm X-clamp and glue
- 05/11/2022
We have added a discount code for buyers of this product.
This discount code can be used to purchase 'Doric Order Monument'.
To check the discount code, please refer to 'post-purchase information' on the product purchase page.
- 5/12/2023
Add "[100mm] Tuscan Column 7D.zip"
1. Minimal support
2. It requires assembly with a glue or x-clamp(included in the product)
3. FDM 3d printer recommended
4. PLA filament recommended
5. Required build volume : at least 30mm x 30mm x 150mm
Thank You!
Please look forward to our next product :)
| Date published | 15/01/2021 |
| Precio | $4.00 |