Tiara - The Queen of Sheba
2,666
visitas
205
descargas
0 comentarios
Cargando comentarios... 
Tiara - The Queen of Sheba
3D
Published 2018-08-17T16:36:00+00:00
68
0
Add to Collection
Descripción
my first 3D printed tiara. Printed flat then curved with a heat gun over a suitable cylinda protecded with tin foil. be very careful with the heatgun it softens quite quickly.
I populated the mounts with cheap thrift store stick on jewels
jewel sizes := 6mm rounds. 5mm rounds, 10mm rounds, 8mm squares and 4mm squares
Attach 1.5mm diameter wire at back to ware. i used 0.4mm gold coloured wire twisted around frame and wire, then covered the join with epoxy resin.
Información técnica
| Date published | 17/08/2018 |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
Más información
Archivos
