You must print 2 pieces of each file (TIE_Spinner, TIE_Spinner_Axis and TIE_Spinner_Cap).
Choose the TIE_Spinner_Axis depending on the inner diameter of your bearing (7 mm and 8 mm available).
- Parts printed.
- 4 x 10 mm metallic balls
- A skate bearing (8x22x7 mm or 7x22x7 mm)
- Glue (optional but recommended)
The Caps and the Axis parts have a small hole to be used as positioning, using a small piece of 1.75mm filament.
All the parts can be assembled just by press fit, but I encourage using superglue or similar, as the balls can fall while spinning.