Tlaser CoreXY Cantilever Laser Engraver
Tlaser CoreXY Cantilever Laser Engraver
3D
Published 2019-08-02T11:21:26+00:00
Tlaser
Tlaser is a laser engraver designed as proof of concept of a new motion system, coreXY cantilever. It's called Tlaser because this motion system, and thus this machine, is shaped like a T.
Find more and download all the files at GitHub: https://github.com/FiCacador/Tlaser
Main features:
- CoreXY cantilever
- 5500mW blue laser
- 315mm x 205mm engraving area
- Linear guide rails
- Adjustable height at each corner
- 3D printed
All STL files are already correctly oriented for ease of printing.
Dimensional accuracy is very important. This is an assembly of mechanical parts designed to fit tight, the slightest overextrusion will make for a hard time during the assembly.
Due to proximity to the stepper motors and laser module, Laser Mount, Motor Mount Left and Motor Mount Right should be printed with a more heat resistant material, like ABS or PETG.
Recommended settings: 0.5 mm line width, 0.2 mm layer height, 2 mm wall thickness, over 15% infill. Some parts require support. Base Left and Base Right are prone to warping, requiring good bed adhesion.
Total printing time around 38h. Total filament used approximately 600g.
| Date published | 02/08/2019 |
| Cantidad de filamento | 600 grams |
| Dimensiones | 210mm x 210mm |