Traditional Water Scoop (Re-Design)
Traditional Water Scoop (Re-Design)
Published 2018-12-28T08:45:21+00:00
Design base on traditional water scoop or often referred to as "gayung" in Indonesia has a function to be a container to move water. not infrequently used for bathing and watering plants. based on internal research I did (https://www.researchgate.net/publication/321873773_Studi_Ergonomi_Produk_Gayung). The results are that the water scoop is still used for the same activities. but now there are various forms. Apart from the shape that I hold on to the handle I change the shape so that it can be grasped properly. besides, by combining the function as a tool to water the plants so that at the bottom of the water scoop I give a hole. and don't forget to add it with a water hose.
Object :
1. Scoop: Material PLA (210 degree). Quality 0.4 . Printing Time : 4 H: 11 M. Layer 232. Infill 10-20%. Speed: 40 mm/s
2. Water Hose & Handle: Material PLA (210 Degree). Quality 0.2. Printing Time: 2 H: 15 M. Layer 572. Infill 10-20%. Speed:40 mm/s
3. Handle: Material Flexi (215 Degree). Quality 0.2. Printing Time: 2 H: 45 M. Layer 400. Infill 10-20%. Speed: 15 mm/s
Date published | 28/12/2018 |