Ultralight Snow Shovel For Winter Camping
$5.00 Ultralight Snow Shovel For Winter Camping
3D
Published 2021-02-22T08:59:20+00:00
A small, durable, lightweight, single-handed snow shovel for winter camping & backpacking. Rugged enough to beat the crap out of. Angled handle to get a nice flat lay of the scoop against the ground, and a flat wedged head for reliability and penetration. Also features a wide, heavy-duty center reinforcing beam to keep the shovel sturdy if you opt to use this for sand or gravel or something.
Has a ridged handle so you maintain strong grip on it with gloved hands, and a hole in the tip of the handle for a carabiner or cordage.
Dimensions:
Scoop: 14.5cm from rearmost outer wall to tip of wedge, 12.8cm wide, 5.8cm from ground to top of scoop (with scoop laying flat at front).
Total: 21.7cm x 12.8cm x 8.3cm
Weight: Approximately 125 grams with my home printed prototype (PLA, 20% infill).
Print in at least 20% infill, bump up as necessary to strike the best durability to weight ratio. PLA should be fine, but ASA is likely the best material for long-term durability. No supports needed, but the steep overhang angle leaves the underside rough; you might want to sand for aesthetics
Print in at least 20% infill, bump up as necessary to strike the best durability to weight ratio. PLA should be fine, but ASA is likely the best material for long-term durability. No supports needed, but the steep overhang angle leaves the underside rough; you might want to sand for aesthetics
| Date published | 22/02/2021 |
| Precio | $5.00 |
| Dimensiones | 21.7cm x 13cm x 8.3cm |
| Sin apoyo | YES |