Ultrawide Lightweight Tent Stake For Sand & Snow
$5.00 Ultrawide Lightweight Tent Stake For Sand & Snow
3D
Published 2021-02-01T09:46:09+00:00
An ultrawide tent/tarp stake I designed for snow and sand applications. Would work for gravel too.
Could also be buried by tying off to the center smaller hole if standard stake insertion methods aren't effective.
Stake is 20cm long, 3.7cm wide, and 1.25 cm thick.
Print in 10% infill for light duty applications; print in full 100% infill for heavy duty use. Weighed my prototype in at 26g in PLA at 10% infill; probably around 30g with 100%. ABS will be slightly lighter. No supports needed
Print in 10% infill for light duty applications; print in full 100% infill for heavy duty use. Weighed my prototype in at 26g in PLA at 10% infill; probably around 30g with 100%. ABS will be slightly lighter. No supports needed
| Date published | 01/02/2021 |
| Precio | $5.00 |
| Cantidad de filamento | 30g @ 100% infill (PLA) |
| Dimensiones | 20cm x 3.7cm x 1.25cm |
| Sin apoyo | YES |