Vacuum Cleaner Attachment
11,533
visitas
941
descargas
8
colecciones
0 comentarios
Cargando comentarios...
Vacuum Cleaner Attachment
3D
Published 2015-01-28T13:58:16+00:00
157
0
Add to Collection
Descripción
This is a spare attachment for your vacuum cleaner nozzle.
A useful crevice too for cleaning corners and tight spots, shown here attached to a Henry Hoover.
I designed this as I had lost the original - here for you to print your own if you've had the same problem, but also good to have as a spare!
Detalles de impresión
Print the attachment vertically with the circular end on the print bed.
I recommend around 25% infill to give the part some strength for durability in use.
The part will print completely support free, but I would advise adding a brim around the base in your slicing software to prevent the print detaching due to the small surface area in contact with the bed.
Información técnica
Date published | 28/01/2015 |
¿Cuándo tiempo lleva? | 60 - 180 minutos |
Cantidad de filamento | 39 grams |
Dimensiones | 40mm x 40mm x 166mm |
Complejidad | Muy fácil |
Sin apoyo | YES |
Más información
Archivos