vikings Spinner & Caps no support needed
2,365
visitas
37
descargas
0 comentarios
Cargando comentarios...
vikings Spinner & Caps no support needed
3D
Published 2017-07-17T12:10:29+00:00
1
0
Add to Collection
Descripción
This object was made in Tinkercad. https://www.tinkercad.com/things/4WRTrc2HkoL
Detalles de impresión
this file has caps that print supports are built into the print just remove after printed supports may be a little tuff to remove depending on your printer but they do remove.Have added 2 files one is the caps themself other file is just the spinner in case you want to print the caps different color.I did a version 2 removing the footballs between the bearing and the viking head found that it is a little weak at the bearing end.Version 2 is allot stronger and also smaller which can be good for smaller hands.I also made a 70MM version of V2 and caps to fit it.
Información técnica
Date published | 17/07/2017 |
¿Cuándo tiempo lleva? | 66 - 148 minutos |
Cantidad de filamento | 12 grams/23grams |
Dimensiones | V1 70mm x 70mm x 7mm & V2 47mm x 47mm x 7mm |
Tecnología | FDM |
Sin apoyo | YES |
Más información
Archivos