Vinovation Laptop Stand
$0.99 Vinovation Laptop Stand
3D
Published 2019-09-09T09:40:11+00:00
Hi,
Thanks for visiting my little creation, and hope you will enjoy using this little product.
The current design has 18 mm slot version, 20 mm slot version, and 22 mm slot version, so it will fit with most laptops with or without a protective case. Please measure your laptop thickness then select the right gap size for your laptop
To prevent the stand from scratching your expensive laptop, I included a 4 mm foam spacers on my design (orange color).
You can order these adhesive foams by clicking on the following link below or get it from your local hardware stores:
The profile cut drawings of these rubber also included. One PDF to print the profile out on A4 paper and one DXF for laser cut.
The model comes in two halves and full version, so it can be print with small 3D printers (100x100 bed), or big printer.
Feel free to leave any feedback, I will do my best to answer them.
Enjoy!
25% infill should be sufficient
Print with ABS, then treat with Aceton vapor. This process will result in a shiny and polish surface just like on the photos.
If you don't know how to do it, please watch on to the link below to know how:
https://www.youtube.com/watch?v=6xFUNFG-UKE
Enjoy!
| Date published | 09/09/2019 |
| Precio | $0.99 |
| Cantidad de filamento | 100 |
| Dimensiones | 100x120x70 |