Voltorn 81'/84' Black Lion Replacement Wing
Voltorn 81'/84' Black Lion Replacement Wing
3D
Published 2018-10-23T11:12:16+00:00
This is a replacement Wing for the Black lion from the 1981/1984 Dicast Voltron set. Growing up i had the set from 1984 and as an adult i picked up the 1981 set. On both sets the first thing to break was one of the Red Wings on the Black Lion.
There are 4 files. One is all the parts on a single plate. Then you have a separate file for the Wing Coupler, Wing Tip, and Wing Base. The Wing Tip and Wing Base are split in half for better printing. You'll need to glue them together with some CA Glue.
You'll need a couple of 2mm x 21mm pins to attach the wing segmetns to the coupler. If your missing the pin to attach the wing to teh Black Lion you'll need a 2mm x 26mm pin for that. The pins should be a tight fit in the wing's holes and loose on the coupler and Lion side.
This object doesn't require supports but it may help to better maintain the pin holes.
2mm layer height
20% infill
| Date published | 23/10/2018 |
| ¿Cuándo tiempo lleva? | - 50 minutos |
| Cantidad de filamento | 9 grams |
| Dimensiones | 64x112x8 |
| Sin apoyo | YES |