Washer agitator dog
Washer agitator dog
3D
Published 2017-12-04T15:08:17+00:00
This is a replacement agitator dog for washing machine. You will need 4 of those.
If the upper section of the agitator isn't turning properly, then these cogs are likely worn and will require replacement.
It fits models from whirlpool brands including Amana, Maytag, Admiral, Kenmore and others
The reference of the part is 80040.
The can check the bottom of this link to see if it fits your model https://www.ebay.com/itm/NEW-80040-PS388034-AP3119063-WHIRLPOOL-SEARS-KENMORE-ROPER-WASHER-AGITATOR-DOGS-/201075223054
You can buy it 3D printed on Ebay: https://www.ebay.com/itm/112613971700
You can print it in PLA but a stronger material like ABS, Polycarbonate or Co-Polyester will make it last longer.
Print the part with the flat surface on the platform.
I recommend 100% infill (as the part needs to be as strong as possible).
No support needed.
| Date published | 04/12/2017 |
| ¿Cuándo tiempo lleva? | 65 - 130 minutos |
| Cantidad de filamento | 9 |
| Dimensiones | 58 27 25 |
| Tecnología | FDM |
| Complejidad | Fácil |
