Wine Garafe/Long Neck Beer Bottle Holder
$5.00 Wine Garafe/Long Neck Beer Bottle Holder
3D
Published 2019-03-12T15:24:17+00:00
I made this model using Fusion 360, as a present for my sister as she's a wine drinker, and loves giraffes. It's currently scaled around a bottle of XiaoXing Chinese cooking wine, as iit's all I had on hand to use as a reference, but can easily be scaled to suit whatever bottle you would like to fit it to (Measure your wine bottle, then scale the giraffe and included wine bottle model until the bottle matches the size you desire :)
I have included a few versions to give some choices.
The download includes:
-Single body print
-Single body print with flatter bottom
-Multi body print in place for multi-colour printing
-Multi body print in place for multi-colour printing with flatter bottom
-Split versions with alignment slot, of the all the above in case it doesn't fit on your printer bed in one go (Split in to 2 halves -Head, Spots, Eyes, Mouth -Body, Spots, Hooves (Or just head and body for single colour prints)
-Wine Bottle and Lid models.
-------------------------------------------------------------------------------------------------------------------------------------
The reason some of the files are 3MF, are they were all originally exported as STL, but a few of the pieces were over the 100Mb file size limit, so I converted all the parts for those pieces to 3MF as the file size is significanly smaller. If you can't use 3MF in your slicer, you can easily convert the files to STL in mnay programs like 3dBuilder, Meshmixer etc.
-------------------------------------------------------------------------------------------------------------------------------------
-Wine bottle model is mostly for scale reference, and not intended to be printed, though you can if you want (It's been modeled around a bottle of Chinese XiaoXing cooking wine as it's all I had on hand)
Normally I would include the Fusion 360 source file for something like this, but the file is too large to fit on here, so if anybody would like to obtain the source file, please feel free to contact me, and I will happily provide it for you.
The print pictured above was done by twitter user @The3Daddict so big thanks to him for testing it out :)
Small versions of this model can be successfully printed with no supports, but the bigger you go, the more likely you will need support. The picture supplied by @The3Daddict was printed using builld plate support, with 0.18mm layer height and a 0.5mm nozzle using silver PLA on the Lulzbot Mini, and took him approximately 2 hours. (I'm not 100% ceertain of the scale he used)
| Date published | 12/03/2019 |
| Precio | $5.00 |
| Dimensiones | 274mm X 105mm X 134mm (at 100%) |
| Tecnología | FDM |