NES Controller Grip
![](https://static.myminifactory.com/images/profile-default.jpg?v152)
![](https://static.myminifactory.com/images/ajax-loader.gif?v152)
NES Controller Grip
Published 2020-05-31T01:37:36+00:00
A friend wanted a more comfortable grip for his NES. Due to other grips lacking comfort, I made this one.
It is designed to hold the controller pretty well but you will have to put a piece of foam on the left or right. This is to prevent controllers getting stuck or fitting too tighly that it scratches the controller.
There is a hole in the top designed for cable management, you can use a velcro tie or zip tie to get the cable out of the way.
This is used in speedruns preformed by somewes.
If you want one printed I am selling them at NES4.fun
Print one for yourself or a friend, and have fun playing your Retro games in comfort.
This is a remix of:
PS4 Decoy Controller by Vince_Prints
Originally shared under the Creative Commons – Attribution license.
Print the top and bottom halves you will have to glue them together.
I am using .16mm layer heights to make it a softer grip.
I print this with a brim to prevent warping on the bed.
Date de publication | 31/05/2020 |
Quantité de filament | about 100g |
Sans support | YES |